Australia | New Zealand
The Allnic Audio A-2500 is a high-end single-ended triode monoblock power amplifier designed around either a 211 or 845 power tube, selected when ordering. Each monoblock delivers 20 W of pure Class A continuous power and incorporates Allnic Audio’s Permalloy transformer technology and point-to-point hard-wired circuitry.
The A-2500 combines a powerful tube driving circuit with direct-heated vacuum tube rectification and Allnic’s Full Engagement output transformers. Its analogue power-tube current meter provides direct monitoring of tube current and allows the bias to be adjusted as required.
| Dimension | 440 mm W x 370 mm D x 260 mm H per monoblock |
|---|---|
| Output Power | 20 W per monoblock |
| Power Tube | 211 or 845, selected when ordering |
| Total Harmonic Distortion | 0.3% at 5 W / 1 kHz |
| Frequency Response | 20 Hz to 20 kHz, ±0.5 dB |
| S/N Ratio | -80 dB (CCIR, 1 kHz) |
| Damping Factor | 4 at 8 Ω load at 1 kHz |
| Voltage Gain | +28 dB (211 version); +26 dB (845 version) |
| Input Impedance | 100 kΩ (single-ended, unbalanced) |
| Input Sensitivity | 0.7 V for maximum rated power |
| Speaker Impedance | 4 Ω or 8 Ω; 8 Ω and 16 Ω available by special order |
| Input | 1 x XLR, 1 x RCA per monoblock |
| Speaker Terminals | 1 pair per monoblock |
| Tubes | 211 or 845 x 1; 6CM7 x 1 for 211 version or 6DR7 x 1 for 845 version; 5R4 x 1 per monoblock |
| Mains Fuse | 5 A, 250 V, 20 mm slow-blow for 110–120 V; 3 A, 250 V, 20 mm slow-blow for 210–230 V |
| Power Tube Protection Fuse | 0.5 A, 250 V, 20 mm slow-blow |
| Weight | 20 kg net per monoblock; 25 kg shipping weight per monoblock |