Australia | New Zealand

T-1500 MK2 300B Integrated Amplifier
SKU: T-1500-MK2
$16,900.00

Description

The Allnic T-1500 MK2 is a premium 300B single-ended triode integrated amplifier designed for listeners seeking the distinctive musical character and natural presentation associated with classic SET amplification. As Allnic’s flagship 300B integrated amplifier, it combines traditional triode topology with the company’s proprietary transformer and drive-stage technologies to maximise performance from the renowned 300B tube.

A key aspect of the design is Allnic’s Inductor Drive circuit, which provides significantly greater voltage swing than conventional resistor-capacitor coupled 300B amplifier designs. Combined with high-grade nickel Permalloy transformers and carefully matched circuit stages, the T-1500 MK2 is engineered to deliver low distortion, wide frequency response, and excellent loudspeaker control while preserving the natural qualities of single-ended operation.

The amplifier further incorporates self-bias operation, analogue tube current monitoring meters, a remote-controlled silver-contact attenuator, and soft-start protection circuitry. These features contribute to ease of ownership, long-term reliability, and consistent performance while maintaining the sonic qualities highly valued by enthusiasts of 300B amplification.

Specifications

Dimension 430 × 380 × 240 mm
Output Power 10 W + 10 W (4 Ω, 8 Ω or 16 Ω load, at 1 kHz)
Distortion 0.3% at 1 kHz at 2.83 V
Frequency Response 20 Hz - 20 kHz (flat)
Signal-to-Noise Ratio -80 dB (CCIR, 1 kHz)
Damping Factor 10 at 8 Ω load at 1 kHz
Voltage Gain +35 dB
Input Impedance 10 kΩ (single-ended, unbalanced)
Input Sensitivity 230 mV for rated power
AC Mains Fuse 3 A / 250 V
Tube Fuse 0.5 A / 250 V, 20 mm glass type
Power Tubes 300B × 2
First Stage Tube 6SL7 (6N9P) × 1
Second Stage Tube 6SN7 × 1
Net Weight 22 kg
Shipping Weight 26 kg

Features

  • Single-ended Class A 300B integrated amplifier design
  • Proprietary Inductor Drive circuitry for enhanced voltage swing and reduced distortion
  • Real power drive stage using choke-loaded tube circuitry
  • Nickel Permalloy core output transformers
  • Large output transformer design for extended frequency response
  • Self-bias control grid operation
  • Analogue power tube current monitoring meters
  • Approximately 6 dB of carefully applied negative feedback for improved damping and lower distortion
  • Remote-controlled 41-step silver-contact attenuator Ver.2
  • Non-inductive resistor attenuator design for precise channel balance
  • Soft-start circuitry for tube protection and extended component life
  • Wide-bandwidth performance with excellent square-wave response

Downloads

Make an Enquiry

×